Power cord or power connector, These power plug for PC ( เต้ารับ ไฟฟ้า, which is the term in Thai) allow you to connect your electrical appliance with one of its ends plugged into the power socket or wall extension board by itself, and its other end plugged into the receptacle installed on the device to build a temporary connection system.
Appliances that are solely battery supported need these power cords to link for controlling and energizing themselves to the main electrical supply line. Few battery-backed devices need the link mostly only to recharge batteries. Such cables can carry both intermittent and continuous current.
The plug has one end of the power cables, as well as the other end has a connector. The connector inserted into the receptacle and the plug mounted in the socket of the wall. Such two endings may be of male or female descent.
Powercord For Computer:
Most desktop computers and some printers, monitors, and other portable devices use the c13 power cord. A power cord with a country-specific standard power plug connected to one end and a power cord coupler c13 to the other end is generally referred to as an IEC cable or computer power cord, as it is used primarily in computer applications.
Standards Of Powercords For Computer:
The computer power cord, c13 with the standard 60320, is defined by the International Electrotechnical Commission. The quality specifies the electrical, mechanical, thermal, and safety requirements of the specified power cable cord. Coupler connector selection often relies on the form, length, and height of the device to be attached to the power cord.
The power cord of c13 rated at 15A/250V and 10A/250V with a temperature of up to 65 ° C. The temperature of the pin is that maximum temperature value. The c13 power cord comprises Earth Communication, and it requires rewired connections as well.
